How to Make a Tied Fleece Blanket: A Simple DIY Guide

Tied fleece blankets are a popular DIY project because they require no sewing skills, are quick to make, and can be personalized in countless ways. This guide will walk you through the steps to create your own tied fleece blanket, which is as fun to make as it is to use.

How to Make a Fleece Tied Blanket

Creating a fleece tied blanket is a delightful and straightforward DIY project suitable for crafters of all ages. This type of blanket is perfect for personal use, gifting, or even charity donations due to its versatility and the personal touch that can be added during the creation process.

Materials and Setup

To begin, you’ll need the following materials:

• Fleece Fabric: Typically, you will need two pieces of fleece fabric of equal size. Each piece should be about 1.5 to 2 yards in length, which is ideal for a good-sized throw blanket.
• Scissors: A sharp pair of scissors is crucial for making clean cuts through the fleece.
• Measuring Tape or Ruler: This helps ensure your cuts are even and consistent.
• Marker or Chalk: Useful for marking measurements on your fabric, especially if you’re working with dark-colored fleece.

Choosing Your Fleece

The selection of fleece fabric is one of the most enjoyable parts of this project. Consider these aspects:

• Texture and Weight: Fleece comes in various textures and weights. Opt for a medium-weight fleece for a balance of warmth and ease of handling.
• Colors and Patterns: You can choose complementary colors or contrasting colors depending on the visual effect you desire. Patterns can range from simple polka dots to elaborate themed prints that can make the blanket a personalized gift or a themed accessory in a room.

Step-by-Step Guide to Making a Tied Fleece Blanket

1. Prepare the Fleece:

   • Lay the two pieces of fleece one over the other on a large, flat surface. Ensure that the edges are aligned perfectly.
   • Smooth out any wrinkles or folds in the fabric to prevent uneven cutting or tying later.

2. Measure and Cut the Corners:

   • Remove a square from each corner of the fabric stack to make tying easier and prevent bulk. A typical size to cut is a 4x4 inch square, but this can be adjusted based on the overall size of your blanket.

3. Cut the Fringes:

   • Using your measuring tape, mark 1-inch intervals along each edge of the blanket.
   • From each mark, cut straight into the fabric about 4 inches deep. Make sure your cuts are uniform as this will affect how your knots tie together.

4. Tie the Knots:

   • Start at one corner and take a fringe from the top layer and its corresponding fringe from the bottom layer.
   • Tie them together using a simple overhand knot by making a loop and pulling the ends through it. Ensure each knot is tight enough to hold but not so tight that it bunches the fabric or distorts the edges of the blanket.
   • Continue tying knots until all fringes along all four sides are securely tied.

Tips for Perfecting Your Blanket

• Even Fringes: Ensure all fringes are cut to the same width and length for a uniform look.
• Knot Consistency: Keep your knots consistent throughout to avoid a lopsided blanket. Each knot should be snug, but not so tight that it pulls the fabric excessively.
• Pattern Alignment: If using patterned fleece, try to align the patterns at the seams for a seamless look. This may require precise cutting and alignment during the initial setup.

Final Touches

After tying all the knots, you may want to go over the blanket to trim any fringes that are too long or adjust any knots that are too loose. This final step ensures your blanket looks neat and professionally made.

Just as you can choose the perfect fleece to match your style, ensuring your sleeping comfort can be just as personalized. A Puffy Lux Mattress provides tailored comfort that fits your needs, ensuring a restful night’s sleep, much like the comfort you get from your DIY fleece blanket.

How to Make a No Sew Tied Fleece Blanket

Creating a no-sew tied fleece blanket is an excellent craft for anyone looking for a straightforward, fun project that results in a useful and cozy item. This project doesn’t require any sewing skills and can be completed in just a few hours, making it perfect for crafters of all ages.

Materials Needed

To get started, you will need:

• Fleece Fabric: You will need two pieces of fleece, typically 1.5 to 2 yards each. Choose two colors or patterns that complement each other for an appealing look.
• Scissors: Make sure they are sharp enough to cut cleanly through the fleece.
• Measuring Tape or Ruler: This will help ensure your cuts are accurate.
• Cutting Mat (optional): If available, a cutting mat can protect your surface and make cutting easier.

Choosing Your Fleece

The choice of fleece is important not only for the blanket’s look but also for its comfort:

• Weight and Quality: Opt for a medium-weight fleece for ease of handling and optimal warmth. Higher-quality fleece will result in a softer blanket and is less likely to pill or shed.
• Designs and Colors: Selecting contrasting colors can make the knots stand out, or you can choose colors that blend well if you prefer a more subtle look. Fun patterns and prints can add personality to your blanket, especially if it’s intended as a gift.

Step-by-Step Guide to Making the Blanket

1. Prepare the Fabric:

   • Lay the two pieces of fleece flat on your work surface, one on top of the other, aligning all the edges as precisely as possible.
   • Smooth out any wrinkles or creases in the fabric.

2. Cutting the Blanket to Size:

   • If your fleece is not pre-cut, use a measuring tape and scissors to trim it to your desired dimensions. A standard throw size is about 48 by 60 inches, which is ample for snuggling.

3. Trimming the Corners:

   • Cut a square out of each corner of the fabric stack—about 4x4 inches—this will help to reduce bulk when you tie the knots at the corners.

4. Cutting the Fringes:

   • Measure and cut 1-inch wide strips along each side of the fabric stack. Each strip should be about 4 inches deep. Use your ruler or measuring tape to ensure consistency, which is key to a neat finished product.

5. Tying the Fringes:

   • Begin at one corner and tie the top layer strip to the corresponding bottom layer strip using a simple square knot. Ensure each knot is tight enough to secure but not so tight that it bunches the fabric.
   • Continue tying knots along each side until all strips are securely tied. This process can be quite therapeutic as you see the blanket coming together.

Creating a comfortable environment doesn’t stop with just your daytime activities. Pairing your DIY efforts with a Puffy Lux Mattress ensures that your comfort continues through the night, providing a restful sleep that’s as cozy as your new blanket.

I remember making one of these blankets for my daughter’s college dorm room. We chose her school colors, and she was thrilled with the result. It was a heartfelt send-off gift that she could literally wrap herself up in whenever she missed home.

Conclusion

Making a tied fleece blanket is a rewarding project that results in a functional and stylish item. Whether you’re crafting for yourself, as a gift, or as a fun family activity, the process is enjoyable and the product is always useful. Follow this guide to ensure your blanket turns out perfectly cozy!